ไฮโดรเจน, Hydrogen
ไฮโดรเจน, Hydrogen
   
Oxygen: ONYX | AS-A | AS-B | AS-D | AS-G | AS-K | AS-L | AS-N
Product: Oxygen: AS-N
Oxygen Generating
AS-N: AS-N

The Pressure Swing Adsorption (PSA) Oxygen Generating Process
          Air contains 21% oxygen, 78%nitrogen, 0.9% argon, and 0.1% other gases. AirSep Oxygen Generating Systems separate oxygen from compressed air through a unique Pressure Swing Adsorption (PSA) process. The PSA process uses molecular sieve (a synthetic zeolite), which attracts (adsorbs) nitrogen from air at high pressure and releases (desorbs) it at low pressure. AirSep Oxygen Generators use two vessels filled with molecular sieve as adsorbers. As compressed feed air flows through one of the vessels, the molecular sieve adsorbs nitrogen. The remaining oxygen passes through the vessel and exits as the product gas. Before the adsorber becomes saturated with nitrogen, the feed air is diverted to the second vessel. At that point, the sieve in the first vessel regenerates by desorbing the nitrogen through depressurization and purging it with oxygen from the second vessel. This process is then repeated in the second vessel to complete a cycle that allows the oxygen generator to deliver a constant flow of product oxygen at 90% minimum purity. Under normal operating conditions, the molecular sieve is completely regenerative and will last indefinitely.

Specifications Product Characteristics
           Product Flow: 42 - 52 m3/hr1Factory set to your specific requirements. Standard Product Pressure: 1–65 psig Product Purity: 93% Nominal Product Dew Point: -100°F (-73°C)

Feature:
  • Produces oxygen from compressed air
  • Microprocessor controlled
  • Low operating cost
  • Automatic and unattended operation
  • Easy to install and maintain

Feed Air Requirements
          Clean and Dry "Plant Air" per ISO Specification 5.7.5 Pressure: 90 psig (620 kPa) minimum Temperature: 122°F (50°C) maximum

Control Power Requirements

           120 V ~ ±10%, 50/60 Hz, Single Phase, 1.5 A 220 V ~ ±10%, 50/60 Hz, Single Phase, 0.75 A Typical Power Consumption (at 93% purity): 180 W

Physical Connections
          Compressed Air Inlet: 2˜ 150# flange Product Gas Outlet: 3/4˜ FPT

Typical Application:
  • Ozone (Generator) Feed Gas
  • Waste/Water Treatment
  • Thermal/Chemical Oxidation
  • Cutting/Brazing/Soldering
  • Environmental Remediation
  • Glass Work/Manufacturing/Blowing
  • Fish Farming
  • Hospital Systems


Home | About Us | Products | Application | Contact Us